Sweet Farm Equipment - New & Used Farming Tools & Equipment

Bookmark us!

Home > Cultivators

Sort By:

Page of 1

Used Cultivator Shank Mounting Bracket

Our Price: $28.95

Used Cultivator Shank Mounting Bracket. *No breaks or welds and are 100% usable The can be used to mount a C type shank time or a stiff shank tine. *For 1 1/4 inch diameter shank/stems *Overall Length is 17 1/4 inches *The mounting holes are 16 inches center to center and are 7/16 in diameter *The 2 holes on the one end are 2 inches center to center *The clamp diameter is 5/8 inch with 5/8 inch fine threads *Color may vary from piece to piece. *These fit most Dearborn, Ford, Thrifty, Ferguson, Pittsburgh and many more cultivators that match these dimensions.

Used Cultivator shank with 2 leaf springs

Used Cultivator shank with 2 leaf springs

Our Price: $60.00

This is a Used Cultivator shank with 2 leaf springs. *No breaks or welds and are 100% usable *1 1/4 inch diameter shank/stem *Stem is approx 7 inches long *Overall height of the unit is approx 26 inches *Overall front to back is approx 19 inches *The springs are 1 3/4 inch wide *Each unit has 2 leaf springs with holes on the end to mount your point/shovel *Some may have good usable points/shovel on them and some may not (just figure putting a point on them when they arrive) *Color may vary from piece to piece.

Used Fred Cain 1 Shank Subsoiler with shearpin

Used Fred Cain 1 Shank Subsoiler with shearpin

Our Price: $320.00

Used Fred Cain 1 shank SubSoiler

The 3-point standard duty subsoiler is the right tool for you when breaking up a hardpan developed over years of use. This subsoiler is available with a single shank equipped with a replaceable tip capable of ripping the soil a depth of 25.5 inches. The beveled edge of the high carbon, wear resistant steel shank, combined with a heat-treated replaceable plow point, allows you to cut through the soil with minimal ground disturbance; shear pin protection is provided. The SS is designed for 25-45 HP tractors with Cat I Standard 3 point hook up. Cat. 1-----3 point hook up.

Bolt on shank foot, hitch and top link
Replaceable heat treated plow point
Shear bolt protected
Weight 120 lbs.
Overall width 32"
Overall Height 50"

Used 1 Row Thrifty Vegetable Cultivator

Our Price: $395.00

Used 1 Row Thrifty Vegetable Cultivator

* Perfect for controlling weeds and grass in garden,food plots or truck patches
* Has 6 adjustable feet for different row widths.
* Made for category 1 tractors.
*Field ready

Used 2 row Ripper-Tiller with 9 shanks

Our Price: $670.00

Used 2 Row Ripper-Tiller-Renovator-Cultivator with Cat. 1 tractor hookup

* Has 9 adjustable feet for different spacing widths.

* If you cant pull all 9 shanks, you can remove some as needed

* This is also a cheap tool to do seedbed preparations or to eliminate soil compaction in row crop fields,

* The shank movement is controlled by 2 springs on each shank.

* The points are pretty worn on one end, however, you should be able to get another year out of them before reversing to the other end where there is more life left in the points.

* Made for category 1 tractors.

Used Fred Cain 9 SK All Purpose Plow, Tiller, Ripper

Used Fred Cain 9 SK All Purpose Plow, Tiller, Ripper

Our Price: $845.00

Used Fred Cain 9 Shank All Purpose Plow, Tiller, Ripper, Renovator, Re-Breaker with CATEGORY 1--- 3 point hitch is a good attachment to tear up hard pan.

9 Shank All Purpose Plow

Cat. 1
Easily adjustable
Spring loaded auto reset shanks
Replaceable and reversible heat treated plow points.

* Approx 5 HP per shank needed, however, if you don't have enough tractor HP to pull all 9 shanks, you can easily remove shanks as needed.

* This is the perfect tool to do seedbed preparations or to eliminate soil compaction in row crop fields,

* The shank movement is controlled by 2 springs on each shank.

* Approx: 9" Between Shanks and depth up to 12" approx. (width between shanks can be easily adjusted)

* Heavy Angle Iron tool bar

* Tractor hp required 45 to 65 (Depending on # of shanks you want to pull and how deep you want to pull them.)

* Weight approx. 455 lbs.