Sweet Farm Equipment - New & Used Farming Tools & Equipment

Bookmark us!

Home > Cultipackers

Sort By:

Page of 3

ONE USED CULTIVATOR SHANK WITH MOUNTING CLAMP FOR CULTIMULCHER

ONE USED CULTIVATOR SHANK WITH MOUNTING CLAMP FOR CULTIMULCHER

Our Price: $42.95

ONE USED CULTIVATOR SHANK WITH CLAMP FOR CULTIMULCHERS WITH 1 1/4 INCH SQUARE TUBING FOR THE BAR SIZE THIS CLAMPS TO.
Thanks for looking and may God bless the USA.

* MUST HAVE 1 1/4 INCH SQUARE TUBING FOR THE BAR SIZE THAT THIS CLAMPS TO.... WILL NOT WORK ON OTHER SIZES

* THREADS ON MOUNTING BRACKET ARE RUSTY BUT THE NUTS CAME OFF PRETTY EASY.
"IF YOU HAVE QUESTIONS, CALL

TOLL FREE 1-888-478-1343 MON-F 8-4 CST"

New Cultipacker Octagon (8 sides) Wood Axle Bearing

New Cultipacker Octagon Wood Axle Bearing

Our Price: $48.95

You are buying one (1) New Cultipacker Octagon (8 sides) Wood Axle Bearing that has nominal measurments of 2 1/2" across the flats X 3 1/2" long with 1 3/4" hole.

* Fits most older cultipackers that require a 8 sided wood wear bearing

* Made from high quality cured Ash wood stock.

* Soaked in oil for longer wear life

* Here is a partial list of cultipackers that we have used this bearing on: Dunham, McCormick, Chattanooga, Zig-Zag, Pittsburg, Vulcan, Soilfitter, Oliver.

* Check your specific measurements before you buy.

New Cutipacker Grease Cap for Dunham, McCormick, Vulcan, Soilfitter & More

New Cutipacker Grease Cap for Dunham, McCormick, Vulcan, Soilfitter & More

Our Price: $54.75

This is one New Aftermarket New Cutipacker End Grease Cap for Dunham, McCormick, Vulcan, Soilfitter & Many More. Fits all requiring the dimensions specified below. 30 day money back guarantee. Thanks for looking and may God bless the USA.

* COMES WITH MOUNTING HARDWARE

* MOUNTING HOLES ARE 3/8" DIAMETER AND SPACED 4 1/2" APART ON CENTERLINE

* OVERALL DIAMETER 3 1/2" INSIDE DIAMETER 3 1/8" AND 2" TALL

* THE GREASE CAP IS MADE FROM STAINLESS STEEL

*THE 2 MOUNTING TABS ARE NOT MADE FROM CAST AS THE ORIGINALS AND ARE RESISTANT TO BREAKING OFF.

* BUILT IN GREASE ZERK FOR EASY LUBRICATING

"IF YOU HAVE QUESTIONS, CALL

TOLL FREE 1-888-478-1343 MON-F 8-4 CST"

New Cultipacker Grease Cap for Dunham, McCormick, Vulcan, Soilfitter & More

New Cultipacker Grease Cap for Dunham, McCormick, Vulcan, Soilfitter & More

Our Price: $54.75

This is one New Aftermarket New Cutipacker End Grease Cap for Dunham, McCormick, Vulcan, Soilfitter & Many More. Fits all requiring the dimensions specified below. Thanks for looking and may God bless the USA.

* COMES WITH MOUNTING HARDWARE

* MOUNTING HOLES ARE 3/8" DIAMETER AND SPACED 4 1/2" APART ON CENTERLINE

* OVERALL DIAMETER 3 1/2" INSIDE DIAMETER 3 1/8" AND 2" TALL

* THE GREASE CAP IS MADE FROM STAINLESS STEEL

*THE 2 MOUNTING TABS ARE NOT MADE FROM CAST AS THE ORIGINALS AND ARE RESISTANT TO BREAKING OFF.

* BUILT IN GREASE ZERK FOR EASY LUBRICATING

"IF YOU HAVE QUESTIONS, CALL

TOLL FREE 1-888-478-1343 MON-F 8-4 CST"

TWO NEW WOOD OCTAGON CULTIPACKER BEARING FOR 1 3/4 AXLES

TWO NEW WOOD OCTAGON CULTIPACKER BEARING FOR 1 3/4 AXLES

Our Price: $87.95

You are buying TWO (2) New Cultipacker Octagon (8 sides) Wood Axle Bearing that has nominal measurments of 2 1/2" across the flats X 3 1/2" long with 1 3/4" hole.

* Fits most older cultipackers that require a 8 sided wood wear bearing

* Made from high quality cured Ash wood stock.

* Soaked in oil for longer wear life

* Here is a partial list of cultipackers that we have used this bearing on: Dunham, McCormick, Chattanooga, Zig-Zag, Pittsburg, Vulcan, Soilfitter, Oliver.

* Check your specific measurements before you buy.

FOUR NEW WOOD OCTAGON CULTIPACKER BEARING FOR 1 3/4 AXLES

FOUR NEW WOOD OCTAGON CULTIPACKER BEARING FOR 1 3/4 AXLES

Our Price: $171.95

You are buying FOUR (4) New Cultipacker Octagon (8 sides) Wood Axle Bearing that has nominal measurments of 2 1/2" across the flats X 3 1/2" long with 1 3/4" hole.

* Fits most older cultipackers that require a 8 sided wood wear bearing

* Made from high quality cured Ash wood stock.

* Soaked in oil for longer wear life

* Here is a partial list of cultipackers that we have used this bearing on: Dunham, McCormick, Chattanooga, Zig-Zag, Pittsburg, Vulcan, Soilfitter, Oliver.

* Check your specific measurements before you buy.

Used 3 ft. 800 lb. Roller Pull Type

Our Price: $825.00

Used 3 ft. Yard / Food Plot Roller
FREE 1000 MILE BUSINESS DELIVERY INCLUDED IN LISTED PRICE(see details below)

* * What is free shipping? Free Shipping is defined as shipped to a 18 wheeler accessible  Downtown Commercial non farm Business that has staffed m-f business hours, with offload capabilities. If you need residential/farm delivery, there will be a $50 surcharge and that address still has to be 18 wheeler accessible and have offload capabilities. 

* The 1000 mile free delivery map is shown in picture #3 in the gallery above. If you live outside the free shipping area, we welcome your order and to place your order just as if you lived inside this area. Your order will not be processed until we contact you with your exact shipping amount to your location and get your approval.
* Our Inventory # 795-44514

Built in USA. It is perfect for putting in seed after sowing to get near perfect germination. A cultipacker also firms the soil to help prevent erosion by rain and wind until the crop gets big enough to develop a root system.

Specifications:

* Working Width 3 ft. Overall Width 3.5 ft..

* Weight 800 lbs. (yes 800 lbs. we weighed it)

* Perfect for food plots and farms

* No major breaks or welds.

* Wheel is 16" in diameter.

*Perfect tool for leveling mole hills in the yard!

"IF YOU HAVE QUESTIONS, CALL

TOLL FREE 1-888-478-1343 MON-F 8-4 CST"

Used John Deere 4 ft. Cultipacker

Our Price: $1,195.00

Used 4 ft. John Deere Cultipacker.
FREE 1000 MILE BUSINESS DELIVERY INCLUDED IN LISTED PRICE(see details below)

* * What is free shipping? Free Shipping is defined as shipped to a 18 wheeler accessible  Downtown Commercial non farm Business that has staffed m-f business hours, with offload capabilities. If you need residential/farm delivery, there will be a $30 surcharge and that address still has to be 18 wheeler accessible and have offload capabilities. 

* The 1000 mile free delivery map is shown in picture #3 in the gallery above. If you live outside the free shipping area, we welcome your order and to place your order just as if you lived inside this area. Your order will not be processed until we contact you with your exact shipping amount to your location and get your approval.
* Our Inventory # 1095

Specifications:

* Working Width 4 ft. Overall Width 5 ft..

* 15 HP tractor minimum suggested minimum

* Perfect for food plots and farms

* No major breaks or welds.

* Wheels are 18" in diameter. Sealed bearing on each end.

"IF YOU HAVE QUESTIONS, CALL

TOLL FREE 1-888-478-1343 MON-F 8-4 CST"

New Tar River CP-48L 3 PT Cultipacker

Our Price: $1,425.00

New 4 Ft. Tar River 3 Point Cultipacker. Model CP-48L
FREE 1000 MILE BUSINESS DELIVERY INCLUDED IN LISTED PRICE(see details below)

 * What is free shipping? Free Shipping is defined as shipped to a 18 wheeler accessible  Downtown Commercial non farm Business that has staffed m-f business hours, with offload capabilities. If you need residential/farm delivery, there will be a $30 surcharge and that address still has to be 18 wheeler accessible and have offload capabilities. 

* The 1000 mile free delivery map is shown in picture #3 in the gallery above.If you live outside the free shipping area, we welcome your order and to place your order just as if you lived inside this area. Your order will not be processed until we contact you with your exact shipping amount to your location and get your approval.
* Our Inventory #1295-98531
This is a brand new 3 point cultipacker.   Built in USA. It is perfect for putting in seed after sowing to get near perfect germination. A cultipacker also firms the soil to help prevent erosion by rain and wind until the crop gets big enough to develop a root system. 

Specifications:

New 4 Ft. Tar River 3 Point Cultipacker. Model CP-48L

This is a brand new 3 point cultipacker. Built in USA.
*It is perfect for putting in seed after sowing to get near perfect germination. A cultipacker also firms the soil to help prevent erosion by rain and wind until the crop gets big enough to develop a root system.

Specifications:

* Weight 310 lbs.

* Standard 3 Point Cat. 1 Hitch.

* Greasable Pillow Block bearings on each end.

* 9.5" "Cast Iron" Wheels.

* Working Width 48"

* 18-40 HP tractor suggested.

* Perfect for foodplots and farms

* One year Manufacturers Warranty.

* Jack Stand Included.

* Easily repairable in the future just by removing bolts on the ends.

* Made in USA!!

New 5 ft. Dirt Dog CP960 HD 3 PT Cultipacker

New 5 ft. Dirt Dog CP960 HD 3 PT Cultipacker

Our Price: $1,710.00

New 5 Ft. Dirt Dog HD 3 Point Cultipacker. Model CP960
FREE 1000 MILE BUSINESS DELIVERY INCLUDED IN LISTED PRICE(see details below)

* * What is free shipping? Free Shipping is defined as shipped to a 18 wheeler accessible  Downtown Commercial non farm Business that has staffed m-f business hours, with offload capabilities. If you need residential/farm delivery, there will be a $50 surcharge and that address still has to be 18 wheeler accessible and have offload capabilities. 

* The 1000 mile free delivery map is shown in picture #3 in the gallery above.If you live outside the free shipping area, we welcome your order and to place your order just as if you lived inside this area. Your order will not be processed until we contact you with your exact shipping amount to your location and get your approval.
* Our Inventory # 1495

This is a brand new 3 point cultipacker. Built in USA. It is perfect for putting in seed after sowing to get near perfect germination. A cultipacker also firms the soil to help prevent erosion by rain and wind until the crop gets big enough to develop a root system.

Specifications:

New 5 Ft. Dirt Dog HD 3 Point Cultipacker. Model CP960

Specifications:

* Weight 427 lbs.

* Standard 3 Point Cat. 1 Hitch.

* Greasable Pillow Block bearings on each end.

* 9.64" "Gray Iron" Wheels.

* HD 1.75" Axle

* Working Width 60"

* 30 HP tractor minimum suggested minimum

* Perfect for foodplots and farms

* One year Manufacturers Warranty.

* Jack Stand Included.

* Easily repairable in the future just by removing bolts on the ends.

* Made in USA!!