|
|
|
|
|
|
12 Pack OEM Tar River Drum Mower Blade Replacement for models BDR135,165 &185
|
|
|
12 Pack of OEM Tar River Drum Mower Blades. Part # DM10454..... PRIORITY MAIL SHIPPING. Thanks for looking and may God bless the USA.Specifications: - Replaces OEM # DM10454
- Length: 3.70 in. 94mm
- Center hole: 19 mm.
- Heat treated steel construction
|
|
|
|
|
|
|
|
|
|
Buying 4 New LEFT HAND Replacement Rake Wheels
|
|
|
You are buying Four (4) Brand New LEFT HAND Replacement Wheels For Almost All Makes Of Wheel Rakes.
This is the Same Quality Material That is Used On a Brand New Rake. *Fits: Enorossi, M&W, Tonutti, Sitrex, H&S, Rhino and many more.
SPEICIFICATIONS:
*These are LEFT SIDE Side Delivery Rake Wheels. (This means the hay comes out on the right side, if you are standing behind the rake, looking forward)
*Rake Wheels are the Same as Used on Brand New Rake
*Colors may change without notice
*Each Wheel has 40, 7MM Diameter Teeth.
*Overall Outside Diameter is 55 inches
*Center Pilot Hole is clearance for 3”
*6 Bolt Holes with a Center to Center Dimension of 5".
*Wheels Weigh 37 lbs each.
*Made in Italy - Where Good Quality Hay Rakes Are Made.
*We stock the Right Hand wheels also. Same price.
|
|
|
|
|
|
|
|
|
|
Buying 4 New RIGHT HAND Replacement Rake Wheels
|
|
|
You are buying Four (4) Brand New RIGHT HAND Replacement Wheels For Almost All Makes Of Wheel Rakes.
This is the Same Quality Material That is Used On a Brand New Rake. *Fits: Enorossi, M&W, Tonutti, Sitrex, H&S, Rhino and many more.
SPEICIFICATIONS:
*These are RIGHT SIDE Side Delivery Rake Wheels. (This means the hay comes out on the left side, if you are standing behind the rake, looking forward)
*Rake Wheels are the Same as Used on Brand New Rake
*Colors may change without notice
*Each Wheel has 40, 7MM Diameter Teeth.
*Overall Outside Diameter is 55 inches
*Center Pilot Hole is clearance for 3”
*6 Bolt Holes with a Center to Center Dimension of 5".
*Wheels Weigh 37 lbs each.
*Made in Italy - Where Good Quality Hay Rakes Are Made.
*We stock the Left Hand wheels also. Same price.
|
|
|
|
|
|
|
|
|
|
New TRI Universal Front Mount Bale Spear
|
|
|
New Tennessee River (TRI) Universal Front Loader Mount Bale Spear
* Can be used on most any loader application by using pins.
* Rated at 2500 lb. Capacity.
* Spike length approx:45"
* 3 x 3" tubing
* Adjustable Spear
* Made in USA
|
|
|
|
|
|
|
|
|
|
New Enrossi RP3C -- Compact Wheel Hay Rake
|
|
|
Enorossi RP3C New 3 Wheel Rake, Finger Wheel Rake. With 3 point hitch.
FREE 1000 MILE DELIVERY INCLUDED IN LISTED PRICE(see details below) * * What is free shipping? Free Shipping is defined as shipped to a 18 wheeler accessible Downtown Commercial non farm Business that has staffed m-f business hours, with offload capabilities. If you need residential/farm delivery, there will be a $30 surcharge and that address still has to be 18 wheeler accessible and have offload capabilities. * The 1000 mile free delivery map is shown in picture #3 in the gallery above.If you live outside the free shipping area, we welcome your order and to place your order just as if you lived inside this area. Your order will not be processed until we contact you with your exact shipping amount to your location and get your approval. * Our Inventory # 1195 Easy and efficient hay rake, suitable for any type of forage. The spring system of the tool holder allows raking wheels to adapt to any type of ground with the correct pressure without affecting the forage quality. Independent and interchangeable raking wheels mounted on tapered roller bearings. Teeth made of flexible steel. * Enrossi------ Made in Italy. ---------top quality. * Catagory 1---- 3 point hitch Standard * Working width 6'5" to 7'11" * Operating speed is up to 14 MPH.. * Weight 200 Pounds * Minimum HP Required is 18 * Molded steel hubs and tapered roller bearings * Wheel Diameter is 55 inches * 7mm heavy spring steel teeth * This unit is new and never been used. However it had some shipping scratches on the red main bar upon arrival arrival to us.. Wheels may vary in color. * Factory Warranty.
|
|
|
|
|
|
|
|
|
|
Farmking Enrossi 4 Wheel Rake, Finger Wheel Rake. With 3 point hitch
|
|
|
New 4 Wheel Rake, Finger Wheel Rake. With 3 point hitch. It Rakes and Spreads/Teds and it Can Turn the hay over. Look in the picture to see how it does all this.
* Farm King made by Enrossi. Made in Italy.
*Catagory 1---- 3 point hitch Standard
*Maximum working width is 8 Ft
*Operating speed is up to 14 MPH..
*Transport width 108 inches
*Weight 400 Pounds
*Minimum HP Required is 25
*Molded steel hubs and tapered roller bearings
*Wheel Diameter is 55 inches
*7 mm heavy spring steel teeth
*This unit is brand new and never been used. However it has some very minor shipping scratches upon arrival.
*Factory Warranty.
* This item will be shipped un-assembled on a wood pallet and will take about 1 hour time to assemble.
|
|
|
|
|
|
|
|
|
|
New Farmking Enrossi 5 Wheel Hay Rake with 3 Point Hitch
|
|
|
New Farmking Enrossi 5 Wheel Rake, Finger Wheel Rake. With 3 point hitch. It Rakes and Spreads/Teds and it Can Turn the hay over. Look in the picture to see how it does all this. *Catagory 1 3 point hitch Standard *Maximum working width is 10 Ft *Operating speed is up to 14 MPH.. *Transport width 108 inches *Weight 500 Pounds *Minimum HP Required is 30 *Molded steel hubs and tapered roller bearings *Wheel Diameter is 55 inches *7mm heavy spring steel teeth *This unit is brand new and never been used. However it may arrive with some very minor shipping scratches. *Factory Warranty aganist defects in material and workmanship. Wear Parts excluded. *Rake Colors may vary from shipment to shipment. Sold unassembled. *Easy Access, Only 30 seconds off the interstate exit ramp if you want to pickup?
|
|
|
|
|
|
|
|
|
|
New 16 Ft Snowco hay Bale Elevator with Electric motor
|
|
|
NEW COMPLETE "SNOWCO" 16 FT LONG SQUARE TUBING HAY BALE ELEVATOR WITH MOUNTING BRACKETS AND NEW 110 VOLT FARM DUTY ELECTRIC MOTOR AND DRIVEBELT AND POWER CORD (these pictures do not show some sprokets and chains etc-however- it does come complete with all you need)---HAS 1 YEAR MANUFACTURERS WARRANTY AGANIST DEFECTS IN MATERIAL AND WORKMANSHIP--- THE "SNOWCO" COMPANY IS PROBABLY THE NATIONS BEST, WHEN IT COMES TO HAY HANDLING EQUIPMENT DESIGNS--- PARTS ARE READILY AVAILABLE NATIONWIDE THROUGH YOUR DEALER NETWORK OR FROM US AT SWEET FARM EQUIPMENT LLC--EVERY FARM THAT FEEDS SQUARE HAY BALES MUST HAVE THIS ITEM--MAKES BALE HANDLING A LOT EASIER AND FASTER---THIS MACHINE IS 21 INCHES WIDE AND COMES IN TWO-8 FT SECTIONS THAT YOU SIMPLY BOLT TOGETHER WITH BOLTS(provided)---THE FRAME IS APPROX 1 INCH SQUARE STEEL TUBING AND FEATURES HD # 55 DRAG CHAIN--NET WEIGHT APPROX. #122 POUNDS + ELECTRIC MOTOR WEIGHT OF APPROX. 22 POUNDS---THIS ELEVATOR IS EASILY PUT IN POSITION BY 1 PERSON--WE ALSO HAVE MANY ROOFING CONTRACTORS THAT USE THIS TYPE ELEVATOR TO CONVEY THE SHINGLE BUNDLES ON TOP OF THE ROOF. THIS MACHINE WILL REQUIRE ABOUT 45 MINUTES SETUP TIME UPON ARRIVAL
|
|
|
|
|
|
|
|
|
|
New 20 Ft Snowco hay Bale Elevator with Electric motor
|
|
|
NEW COMPLETE "SNOWCO" 20 FT LONG SQUARE TUBING HAY BALE ELEVATOR WITH MOUNTING BRACKETS AND NEW 110 VOLT FARM DUTY ELECTRIC MOTOR AND DRIVEBELT AND POWER CORD (these pictures do not show some sprokets and chains etc-however- it does come complete with all you need)---HAS 1 YEAR MANUFACTURERS WARRANTY AGANIST DEFECTS IN MATERIAL AND WORKMANSHIP--- THE "SNOWCO" COMPANY IS PROBABLY THE NATIONS BEST, WHEN IT COMES TO HAY HANDLING EQUIPMENT DESIGNS--- PARTS ARE READILY AVAILABLE NATIONWIDE THROUGH YOUR DEALER NETWORK OR FROM US AT SWEET FARM EQUIPMENT LLC--EVERY FARM THAT FEEDS SQUARE HAY BALES MUST HAVE THIS ITEM--MAKES BALE HANDLING A LOT EASIER AND FASTER---THIS MACHINE IS 21 INCHES WIDE AND COMES IN TWO-8 FT SECTIONS AND A 4 FT INTERMEDIATE SECTION THAT YOU SIMPLY BOLT TOGETHER WITH BOLTS(provided)---THE FRAME IS APPROX 1 INCH SQUARE STEEL TUBING AND FEATURES HD # 55 DRAG CHAIN--NET WEIGHT APPROX. #142 POUNDS + ELECTRIC MOTOR WEIGHT OF APPROX. 22 POUNDS---THIS ELEVATOR IS EASILY PUT IN POSITION BY 1 PERSON--WE ALSO HAVE MANY ROOFING CONTRACTORS THAT USE THIS TYPE ELEVATOR TO CONVEY THE SHINGLE BUNDLES ON TOP OF THE ROOF. THIS MACHINE WILL REQUIRE ABOUT 45 MINUTES SETUP TIME UPON ARRIVAL.
|
|
|
|
|
|
|
|
|
|
NEW SNOWCO 24 FT ELEVATOR
|
|
|
NEW COMPLETE "SNOWCO" 24 FT LONG SQUARE TUBING HAY BALE ELEVATOR WITH MOUNTING BRACKETS AND NEW 110 VOLT FARM DUTY ELECTRIC MOTOR AND DRIVEBELT AND POWER CORD (these pictures do not show some sprokets and chains etc-however- it does come complete with all you need)---HAS 1 YEAR MANUFACTURERS WARRANTY AGAINST DEFECTS IN MATERIAL AND WORKMANSHIP--- THE "SNOWCO" COMPANY IS PROBABLY THE NATIONS BEST, WHEN IT COMES TO HAY HANDLING EQUIPMENT DESIGNS--- PARTS ARE READILY AVAILABLE NATIONWIDE THROUGH YOUR DEALER NETWORK OR FROM US AT SWEET FARM EQUIPMENT LLC--EVERY FARM THAT FEEDS SQUARE HAY BALES MUST HAVE THIS ITEM--MAKES BALE HANDLING A LOT EASIER AND FASTER---THIS MACHINE IS 21 INCHES WIDE AND COMES IN THREE-8 FT SECTIONS THAT YOU SIMPLY BOLT TOGETHER WITH BOLTS(provided)---THE FRAME IS APPROX 1 INCH SQUARE STEEL TUBING AND FEATURES HD # 55 DRAG CHAIN--NET WEIGHT APPROX. #173 POUNDS + ELECTRIC MOTOR WEIGHT OF APPROX. 22 POUNDS---THIS ELEVATOR IS EASILY PUT IN POSITION BY 1 PERSON--WE ALSO HAVE MANY ROOFING CONTRACTORS THAT USE THIS TYPE ELEVATOR TO CONVEY THE SHINGLE BUNDLES ON TOP OF THE ROOF.
|
|
|
|
View Cart My Account Help
