Bookmark us!
Sign up for our newsletter to get the latest news and specials!


Bookmark us!

Home > Grooming Mowers/Brush Hogs
Sort By:
Page of 3
Replacement gear set for John Deere MX5 and MX6 mowers
Replacement gear set for John Deere MX5 and MX6 mowers
Our Price: $488.00

Replacement gear set for John Deere MX5 and MX6 mowers

here is what you get: a new output shaft, new ring gear, input seal, output seal and rear rubber cap.

The gear on the shaft has 13 teeth, the ring gear has 22 teeth.

Fits MX5 and MX6 with Iberica (Made In Spain) gearbox:

  • 13 tooth pinion with shaft, 15 splines at bottom of shaft for blade carrier
  • 22 tooth ring gear
  • New input seal
  • New output seal
  • New rubber cap for rear of gearbox
  • New snap ring for output shaft
New Replacement gear set for John Deere MX10 Rotary mowers
New Replacement gear set for John Deere MX10 Rotary mowers
Our Price: $498.00

Replacement gear set for John Deere MX10 Rotary mowers

* This gear set only fits the outboard gearbox on MX 10 cutter

Here is what you get: a new output shaft, new ring gear, input seal, output seal and rear rubber cap.

The gear on the shaft has 18 teeth, the ring gear has 22 teeth

  • Output shaft with 18 tooth pinion
  • Ring Gear with 22 teeth
  • Replacement input and output seal and rear rubber plug
  • Replacement circlip for the output shaft
  • May require use of John Deere input and or output shim kits
  • Requires reusing original bearings or replacing with new
County Line 5 ft. Brush Cutter 3 pt. Made in USA
County Line 5 ft. Brush Cutter 3 pt. Made in USA
Our Price: $925.00

Like New County Line 5 ft. Rotary Cutter or Brush Hog
Made in USA !
This cutter has been used on less than 5 acres. Was bought in a package deal from couple who were getting a divorce. Save big $
* Working width 5 ft.
* Approx. Weight 450 lbs.
* Medium Duty for pasture maintenance and general cutting.
* 40 HP Gearbox with shear pin protection.
* Stump Jumper on underside of deck.
* Cat. 1 Hook up.
* Deck thickness 14 GA. Steel
* Single laminated tail wheel in rear.
* Comes complete with power shaft.
* Minimum 35 HP. with adequate front weight or loader.
* Cut capacity up to 1 "
Used King Kutter 6' Finishing Mower 3 pt. *Made in USA
Used King Kutter 6' Finishing Mower 3 pt. *Made in USA
Our Price: $1,070.00

Used King Kutter 6 ft. Finishing Mower for your 3 pt.
Made in USA !
* Working width 6 ft.
* Approx. Weight 450 lbs.
* Cat. 1 Hook up.
* Adjustable cutting height from approx: 1" to 5"
* Runs out great behind tractor. Belt and blades are in good condition.
* Local mower. Came in with a package deal.
* Side Discharge.
New Tennessee River Imp. 4 ft. Rotary Cutter
New Tennessee River Imp. 4 ft. Rotary Cutter
Our Price: $1,145.00

New Tennessee River Imp. 4 ft. Rotary Cutter or Brush Hog

*Made in USA !

* Working width 4 ft.
* Approx. Weight 400 lbs.
* Medium Duty for pasture maintenance and general cutting. \
* 40 HP Gearbox with shear pin protection.
* Stump Jumper on underside of deck.
* Cat. 1 Hook up.
* Single laminated tailwheel in rear.
* Comes complete with power shaft.
* Minimum 25 HP. with adequate front weight or loader.
* Cut capacity up to 1 "
Taylorway Model 3160 Finishing Mower 3 pt. *Made in USA
Taylorway Model 3160 Finishing Mower 3 pt. *Made in USA
Our Price: $1,175.00

Used Taylor Way Model 3160 Finishing Mower for your 3 pt.
Made in USA !
* Working width 5 ft.
* Approx. Weight 400 lbs.
* Cat. 1 Hook up.
* Adjustable cutting height from approx: 1" to 5"
* Runs out great behind tractor. Belt and blades are in good condition.
* Local mower. Customer bought zero turn mower and didn't have any use for this mower.
* Rear Discharge.
New Tennessee River Medium Duty 5ft. Brush Cutter
New Tennessee River Medium Duty 5ft. Brush Cutter
Our Price: $1,295.00

New Tennessee River Imp. 5 ft. Rotary Cutter or Brush Hog

*Made in USA !
* Working width 5 ft.
* Approx. Weight 620 lbs.
* Medium Duty for pasture maintenance and general cutting.
* 40 HP Gearbox with shear pin protection.
* Stump Jumper on underside of deck.
* Cat. 1 or 2 clevis (no pins to keep working loose)
* Single laminated tailwheel in rear.
* Comes complete with power shaft.
* Cutter comes in Kubota Orange color.
* Minimum 30 HP. with adequate front weight or loader.
* Cut capacity up to 1 "
* HD 6" Channel sides
New Tennessee River Rotary Cutter or Brush Hog
New Tennessee River 6 FT Rotary Cutter or Brush Hog
Our Price: $1,395.00

New Tennessee River Imp. 6 ft. Rotary Cutter or Brush Hog

*Slip clutch and Made in USA !
* Working width 6 ft.
* Weight approx. 708 lbs.
* Medium Duty for pasture maintenance and general cutting.
* 40 HP Gearbox with SLIP CLUTCH protection.
* Stump Jumper on underside of deck.
* Cat. 1 or 2 Clevis Type Hook up.
* Single laminated tailwheel in rear.
* Comes complete with power shaft.
* Minimum 35 HP. with adequate front weight or loader.
* Cut capacity up to 1 "
* Deck Thickness 11 ga.
* Floating A-Frame.
* Side Bands HD 6" Channel.
* Color will be red
New 1206 Titan 6 ft MD Brush Hog
New 1206 Titan 6 ft MD Brush Hog
Our Price: $1,695.00

New Titan 6FT MD Cutter
Model
1206
* 5 Year Limited Warranty on Gearbox !
Cutting Width 72"
Cutting Capacity up to 1.5" Maximum.
11 Guage Deck -- Welded All Around
Adjustable Laminated Tailwheel
Deck Reinforced With bracing
55 HP Gearbox
3 Point Hitch With Floating Center Link Hitch
Pan Type Stump Jumper
Cat. 1 Hitch
Features Shearpin for Gearbox Protection!
Series 4 PTO Driveline
Weight 726 lbs.
Replaceable Skid Shoes.
Fully welded gearbox channel.
Recommended Horse Power 40-65
Made in Decatur, Tenn. USA !
New 4 ft GM30-48 Phoenix Sicma Grooming Mower
New 4 ft GM30-48 Phoenix Sicma Grooming Mower
Our Price: $2,095.00

New 4 ft GM30-48 Phoenix Sicma Grooming Mower

*Red in color will be shipped
*
Phoenix Line rear discharge grooming mowers turn your tractor into a mowing machine.
*Solid tires

*Heavy duty and quiet oil filled gearboxes with
*Precision heat treated gears mean more power for your horsepower dollar. *Floating 3 pt. hitches*
*Adjustable lower links allow the mower to closely follow ground contours resulting in a more consistent and professional cut.
*Cutting height adjustment is quick and easy thanks to simple to change spacer bushings.
*All lubrication points are easily accessible without removing belt shields.
*Shields are removable in seconds for belt adjustment and routine maintenance.
*Shipped partially assembled in the crate. Some Assembly required.
*Colot will be orange

   
 
Copyright ©  www.sweettractors.com. All Rights Reserved.
Built with Volusion