View Cart My Account Help

Bookmark us!

Home > Round/Square Baler

Sort By: Price: Low to High Price: High to Low Most Popular Title Manufacturer Newest Oldest Availability 10 per page 20 per page 40 per page 60 per page 100 per page Page of 1 New Idea 484 Round Baler Our Price: $5,050.00 Agco New Idea Round Baler (5x4) * Good solid baler! * This baler produces a 5x4 bale weighing up to 900 lbs. * Baler has monitor with electric tie. (works good) * Weight 3125 lbs. * Twine tie only (no net wrap) * Baler is missing one guard over a chain (see photo) * Belts appear to be in good condition. * Minimum 45 HP PTO Required to use this baler. * This is a fixed chamber baler. * Chains adjusted as needed. * Ran at PTO speed. Checked out good. * This model was made from 1982 to 1994 Long Track History. Case IH 8420 Round Baler-bale size 4x4 Our Price: $6,300.00 Case IH 8420 Round Baler 4x4 Bale Size * Good solid little baler! * Very nice baler that runs out the best and has been well taken care of during its life. * Balers makes a bale 39" wide by 54" tall. * Has manual tie (just pull a rope) No electronics to go bad or loose wires to worry about. * Baler did not come out with monitor (reason for the manual tie) * Ran at pto speed. Everything works as it should. Super quiet machine when running! All chains adjusted as needed. * Twine tie only. THIS BALER DOES NOT HAVE NET WRAP. * Belts are in very good condition. * 40 PTO HP minimum required. Baler weighs 3180 lbs. So you need enough tractor to weigh as much as the baler plus the weight of the bale. * Makes bales up to 800 +or- lbs. (depending on material being baled). * This model was made from 1989-2000 Case IH 8420 Round Baler-bale size 4x4 Our Price: $6,300.00 Case IH 8420 Round Baler 4x4 Bale Size * Good solid little baler! * Very nice baler that runs out the best and has been well taken care of during its life. * Balers makes a bale 39" wide by 54" tall. * Has manual tie (just pull a rope) No electronics to go bad or loose wires to worry about. * Baler has hay saver wheels. (big rubber wheels attached to pickup which helps to gather in hay on the corners or wide wind blown hay). * Baler did not come out with monitor (reason for the manual tie) * Ran at pto speed. Everything works as it should. Super quiet machine when running! All chains adjusted as needed. * Twine tie only. THIS BALER DOES NOT HAVE NET WRAP. * Belts are in very good condition. * 40 PTO HP minimum required. Baler weighs 3180 lbs. So you need enough tractor to weigh as much as the baler plus the weight of the bale. * Makes bales up to 800 +or- lbs. (depending on material being baled). * This model was made from 1989-2000 John Deere 375 Round Baler ---bale size 5x4 Our Price: $7,250.00 John Deere 375 Round Baler 5x4 Bale Size * Good solid little baler! * This baler produces a 5x4 bale weighing up to 1000 lbs. * Baler has hydraulic tie. * Weight 3681 lbs. * Twine tie only (no net wrap) * You will have to have 4 remote hydraulic outlets on your tractor to run this baler. (one set opens and closes tailgate) (one set runs the twine arm to tie the bale) * Belts & splices are in good condition. * Minimum 50 HP PTO Required to use this baler. * Ran at PTO speed. Checked out good. * These balers were made from 1990 to 1996 Agco Hesston 730 Round Baler-size 4x4 Our Price: $7,495.00 Agco Hesston 730 Round Baler 4x4 Bale Size FREE 1000 MILE DELIVERY INCLUDED IN LISTED PRICE(see details below) * What is free shipping? Our Price listed includes Free Shipping to a truck/trailer accessible address within 1000 miles from 42765 Munfordville Ky * The 1000 mile free delivery map is shown in picture #3 in the gallery above.If you live outside the free shipping area, we welcome your order and to place your order just as if you lived inside this area. Your order will not be processed until we contact you with your exact shipping amount to your location and get your approval. * Our Inventory # 6995 * Good solid little baler! * Very nice baler that runs out the best and has been well taken care of during its life. * Balers makes a bale 39" wide by 54" tall. * Has manual tie (just pull a rope) No electronics to go bad or loose wires to worry about. * This baler has not been used much at all. Notice paint in bale chamber (photo with tailgate raised) * Baler did not come out with monitor (reason for the manual tie) * Ran at pto speed. Everything works as it should. Super quiet machine when running! All chains adjusted as needed. * Twine tie only. THIS BALER DOES NOT HAVE NET WRAP. * Belts are in very good condition. * 40 PTO HP minimum required. Baler weighs 2915 lbs. So you need enough tractor to weigh as much as the baler plus the weight of the bale. * Makes bales up to 800 +or- lbs. (depending on material being baled). * This model was made from 2002-2006 New Holland 570 Square Baler Our Price: $7,995.00 New Holland 570 Square Baler FREE 1000 MILE DELIVERY INCLUDED IN LISTED PRICE(see details below) * What is free shipping? Our Price listed includes Free Shipping to a truck/trailer accessible address within 1000 miles from 42765 Munfordville Ky * The 1000 mile free delivery map is shown in picture #3 in the gallery above.If you live outside the free shipping area, we welcome your order and to place your order just as if you lived inside this area. Your order will not be processed until we contact you with your exact shipping amount to your location and get your approval. * Our Inventory # 6995-943459 * Good solid square baler. Owner has leased his ground and was no longer using this baler. Stated he had owned it 4-5 years and baled 1500-2000 bales each year with no problems. We put it though the shop and adjusted the tying mechanism and ran some test knots through it (have video of machine running and tying). It has had new parts installed were needed by local New Holland Dealer. * Baler makes bale size---14" X 18" up to 52" Long. * Shipping weight 3532 lbs. * Includes chute and wagon hitch (as shown in photos) * 93 Plunger Strokes per minute. * Ran at pto speed. Everything works as it should. All chains adjusted as needed. * 45 PTO HP minimum required. * Serial # 804444 Year----1990 Compares to new BC5060 that is in current production. * Baler has minor sheet metal damage (see last photo) 2003 New Holland BR 740 Round Baler- size 4x5 Our Price: $10,250.00 New Holland BR 740 Round Baler 4x5 Bale Size FREE 1000 MILE DELIVERY INCLUDED IN LISTED PRICE(see details below) * What is free shipping? Our Price listed includes Free Shipping to a truck/trailer accessible address within 1000 miles from 42765 Munfordville Ky * The 1000 mile free delivery map is shown in picture #3 in the gallery above.If you live outside the free shipping area, we welcome your order and to place your order just as if you lived inside this area. Your order will not be processed until we contact you with your exact shipping amount to your location and get your approval. * Our Inventory # 8900-565009 * Serial #32458 * Year 2003 * This baler produces a 4x5 bale weighing up to 1200 lbs. * This baler has the optional wide "Xtra Sweep" pickup. * Baler has auto wrap. When bale gets to size you have set, a buzzer sounds and the string is applied automatically. * Twine tie only (no net wrap) * Hydraulic pickup * You will have to have 2 remote hydraulic outlets or 1 set and a switcher valve on your tractor to run this baler. (one set opens and closes tailgate) * Belts & splices are in good condition. * Minimum 50 HP PTO Required to use this baler. * Weight 4800 lbs. * Ran at PTO speed. Checked out good. Monitor checks good and did a twine wrap cycle etc... * Baler has monitor that shows you how to drive to make a good looking bale. 1745 Massey Ferguson Round Baler-bale size 4x5 Our Price: $11,000.00 Massey Ferguson 1745 Round Baler 4x5 Bale Size * Low use baler (approx 5-8K bales been through it). * Year 2009 * This baler produces a 4x5 bale weighing up to 1250 lbs. * Baler has control box that mounts on your tractor (see photo) * Twine tie only (no net wrap) * You will have to have 2 remote hydraulic outlets on your tractor to run this baler. (one set opens and closes tailgate) * Belts & splices are in good condition. * Minimum 45 HP PTO Required to use this baler. * Ran at PTO speed. Checked out good. Monitor checks good and did a twine wrap cycle etc... 2009 John Deere 458 Round Baler-bale size 4x5 Our Price: $12,300.00 John Deere 458 Round Baler 4x5 Bale Size * One Owner Baler trade in to dealer. * Year 2009 * Total bale count 10599 Bales. (see photo) * This baler produces a 4x5 bale weighing up to 1100 lbs. * Baler has baletrak control monitor. * Twine tie only (no net wrap) * You will have to have 2 remote hydraulic outlets on your tractor to run this baler. (one set opens and closes tailgate) * Belts & splices are in good condition. * Minimum 45 HP PTO Required to use this baler. * Ran at PTO speed. Checked out good. Monitor checks good and did a twine wrap cycle etc...

• About Us
• Contact Us
• Bookmark Us

• Terms Of Use
• Privacy Policy
• Like Us On Facebook!

• Shipping
• Returns
• Google+

• Product Index
• Category Index

• My Account
• My Cart