Bookmark us!
Sign up for our newsletter to get the latest news and specials!


Bookmark us!

Home > In Store Pickup > Sickle Mowers

Sickle Bar Mowers

Sickle bar mowers are used to fell crops that are ready for harvest. Corn, hay, wheat and other such crops must be mowed down before being prepared for processing. Sickle bar mowers cut the crops close their base and allow them to fall, relatively neatly, in preparation for the next steps of harvesting.

This page features sickle bar mowers made by John Deere, Ford and International. The sickle bar mowers on this page range from new to used and all are in excellent condition. Sweet Tractors also carries sickle bar mower repair kits for sale.

Any products shipped UPS Ground are shipped free of charge. Freight shipping is calculated into the offered price of products. All products are shipped to downtown terminals for pickup. Residential/Farm delivery is available for additional fees; restrictions apply. See shipping policy for details.

Sort By:
Page of 5
4 Piece Pitman Strap Repair Kit Ford 501 Sickle mowers.Store.Pickup
Our Price: $115.00

FREE SHIPPING----New 4 Piece Pitman Strap Repair Kit for Ford 501 Sickle Bar mowers
Convert Your 6 & 7 Ft SICKLE MOWER Rivets to Bolts.Store.Pickup
Our Price: $134.00

CONVERT Your 6 Ft. or 7 Ft. SICKLE BAR MOWER From RIVETS to BOLTS--NEW "COMPLETE KIT", Fits John Deere 5-8-9-39-350-450 and International 1300, 100 and Ford 501 and 515 and Massey Ferguson 32, 42 Also fits all other brands that use sickle cutting sections that measure 2 inches center to center on the rivet holes and require 7 toe clamps. What you are getting in this Kit * 27 new under serrated sickle sections (That measure 2 inches center to center on the rivet holes) * 1 new universal chrome end sickle section to help prevent clogging. * 7 new universal "High Rise" Toe Clamps so your sickle section nuts will clear as the go under * 50 5/8 inch long bolts with special self-locking nuts for the sickle * 10 1 inch long bolts with special self-locking nuts for the first few sections next to the drive head of the mower. NOTE: By updating your sickle bar mower to the "bolt on" sickle sections, all you will need to remove and install a new section is a 7/16" socket or wrench. Saves a lot of skinned knuckles and just as important, this setup saves a lot of time and is very simple.
CONVERT Your 9 Ft. Sickle Mower From Rivits to Bolts.Store.Pickup
Our Price: $147.00

CONVERT Your 9 Ft. SICKLE BAR MOWER From RIVETS to BOLTS--NEW "COMPLETE KIT", FITS NEW HOLLAND (NH) 450 AND 451 and NEW IDEA 522 and IH 100 AND 1300 AND CASE/IH 1300 Also fits all other brands that use sickle cutting sections that measure 2 1/16 inches center to center on the rivet holes and require 9 toe clamps. What you are getting in this Kit * 31 new under serrated sickle sections (That measure 2 1/16 inches center to center on the rivet holes) * 1 new universal chrome end sickle section to help prevent clogging. * 9 new universal "High Rise" Toe Clamps so your sickle section nuts will clear as the go under * 60 5/8 inch long bolts with special self-locking nuts for the sickle * 10 1 inch long bolts with special self-locking nuts for the first few sections next to the drive head of the mower. NOTE: By updating your sickle bar mower to the "bolt on" sickle sections, all you will need to remove and install a new section is a 7/16" socket or wrench. Saves a lot of skinned knuckles and just as important, this setup saves a lot of time and is very simple.
Used Ford 7ft Model 501 Sickle Bar Mower.Store.Pickup
Our Price: $1,195.00

This is a Good Used Ford Sickle Bar Mower. Model #501 with 7 ft cutter blade. It is perfect for mowing all types of hay crops, mowing pond dams, road banks, under fences, terraces, clipping pastures and much more. This machine will mow 35 degrees vertical or 35 degrees below horizontal. The sickle is sharp and ready to go.

** This mower has good original paint and has been kept inside.

* Local trade in to a new 9 Ft Fort disc mower.

* Standard 3 point hitch category 1

* 1 3/8 inch diameter standard shielded 540 PTO included

*This mower has both stabilizer clamps included.(shown in pics)

* Owners Manual included

* Blade will be removed for shipping purposes.

* No breaks or welds.

* New parts added as needed.

* 29 HP tractor minimum 65 HP Maximum required.

* This Mower Sickle has been sharpened on a specially designed professional sharpening machine and is ready to mow.
Used 7ft John Deere #9 Sickle Bar Mower.Store.Pickup
Our Price: $1,195.00

his is a Nice # 9 Used John Deere  Sickle Bar Mower with 7 Ft Cutter bar. It is perfect for mowing all types of hay crops, mowing pond dams, road banks, under fences, terraces, clipping pastures and much more. This machine will mow 35 degrees vertical or 35 degrees below horizontal. The sickle is sharp and ready to go. This mower is not a Fixer Upper. It is Top Grade and field ready.

*Made in the USA

* Checkout the inside wear shoe on the cutter bar and you can see this mower has not been over many acres.

* Parts available from your John Deere Dealer Network.

* This mower came from a local estate sale

* 1 3/8 inch diameter standard PTO included

* Owners Manual included.

* 29 HP tractor minimum 65 HP Maximum required.

*Gearbox runs free and quiet on our farm tractor.

*Mower cuts great.
Used 6ft John Deere # 9 Sickle Bar Mower.Store.Pickup
Our Price: $1,195.00

This is a Nice # 9 Used John Deere  Sickle Bar Mower with 6 Ft Cutter bar. It is perfect for mowing all types of hay crops, mowing pond dams, road banks, under fences, terraces, clipping pastures and much more. This machine will mow 35 degrees vertical or 35 degrees below horizontal. The sickle is sharp and ready to go. -This mower is not a Fixer Upper. It is Top Grade and field ready.

* We installed new parts as needed

* Made in the USA

* Checkout the inside wear shoe on the cutter bar and you can see this mower has not been over many acres.

* Parts available from your John Deere Dealer Network.

* This mower came from a local tobacco farmer in Lexington Ky

* 1 3/8 inch diameter standard PTO included

* Owners Manual included.

* 19 HP tractor minimum 65 HP Maximum required.

*Gearbox runs free and quiet on our farm tractor.

*Mower cuts great.
Used 7ft Ford #501 Sickle Bar Mower.Store.Pickup
Our Price: $1,195.00

This is a Good Used Ford Sickle Bar Mower. Model #501 with 7 ft cutter blade. It is perfect for mowing all types of hay crops, mowing pond dams, road banks, under fences, terraces, clipping pastures and much more. This machine will mow 35 degrees vertical or 35 degrees below horizontal. The sickle is sharp and ready to go.  


* Special Note to potential sickle bar mower buyers:  We fully understand that it is possible for you to buy a mower for less money at a public auction or on Craigslist.  You need to know what you are getting into. Be prepared to "chase down" parts and buy Rock Guards $8 each, Sections $2.50 each, Grassboard $50, Drivebelt $55, Assorted hardware, paint, u-joints, skid shoes, toe clamps plus, your labor or hired outside shop labor to do the repairs. If you do your calculations correctly, you will quickly find that buying a plow from Sweet Farm Equipment LLC is the smart and most economical place to buy a mower that is already field ready.


* Local trade in to a new Farmking disc mower.

* Standard 3 point hitch category 1

* 1 3/8 inch diameter standard shielded 540 PTO included

*This mower has two stabilizer clamps included.(shown in pics)

* Owners Manual included

* Blade will be removed for shipping purposes.

* No breaks or welds.

* New parts added as needed.

* 29 HP tractor minimum 65 HP Maximum required.

* This Mower Sickle has been sharpened on a specially designed professional sharpening machine and is ready to mow.

* We don't charge you a pallet fee or prep fee. You just pay the low shipping that we quote you.

*We welcome anyone to visit of Business and inspect items before they bid.

*Shipping to a Commercial Business or Picking up at a nearby truck terminal keeps the shipping at its lowest.
Used 6ft Ford 501 (Red) Sickle Bar Mower.Store.Pickup
Our Price: $1,195.00

This is a Good Used Ford Sickle Bar Mower. Model #501 with 6 ft cutter blade. It is perfect for mowing all types of hay crops, mowing pond dams, road banks, under fences, terraces, clipping pastures and much more. This machine will mow 35 degrees vertical or 35 degrees below horizontal. The sickle is sharp and ready to go.

* Local trade in to a new Hay Tedder.

* Standard 3 point hitch category 1

* 1 3/8 inch diameter standard 540 PTO included

*This mower has 2 stabilizer clamps included.(shown in pics)

* Owners Manual included

* Blade will be removed for shipping purposes.

* No major breaks or welds.

* New parts added as needed.

* 19 HP tractor minimum 65 HP Maximum required.

* This Mower Sickle has been sharpened on a specially designed professional sharpening machine and is ready to mow.

* We don't charge you a pallet fee or prep fee. You just pay the low shipping that we quote you.

*We welcome anyone to visit of Business and inspect items before they bid.
Used 9ft John Deere #38 Semi Mount Sickle Bar Mower.Store.Pickup
Our Price: $1,295.00

his is a Good Used One Owner SEMI MOUNT John Deere 9 Ft.  Sickle Bar Mower. Model # 38. It is perfect for mowing all types of hay crops, mowing pond dams, road banks, under fences, terraces, clipping pastures and much more. This machine will mow 35 degrees vertical or 35  Degrees below horizontal. The sickle is sharp and ready to go. The mower will actually run just like you see it in the pictures.

* Made in the USA


* 1 3/8 inch diameter 540 rpm standard PTO included

* Owners Manual included.

* Came out Ky estate sale.

* 30 HP tractor minimum 125 HP Maximum required.

*Mower runs free and quiet on our tractor.

*Mower cuts great.

*Blade sharpened

*Mower greased and ready to go.

*Mower come with hydraulic cylinder and hose to raise and lower the mower. Your tractor will need 1 hydraulic line at the back of the tractor.
Used John Deere #9 7ft Sickle Bar Mower.Store.Pickup
Our Price: $1,345.00

This is a Nice # 9 Used John Deere  Sickle Bar Mower with 7 Ft Cutter bar. It is perfect for mowing all types of hay crops, mowing pond dams, road banks, under fences, terraces, clipping pastures and much more. This machine will mow 35 degrees vertical or 35 degrees below horizontal. The sickle is sharp and ready to go. Thanks for looking and visit our Ebay Store for other fine implements and parts.--This mower is not a Fixer Upper. It is Top Grade and field ready.

*Made in the USA

* Checkout the inside wear shoe on the cutter bar and you can see this mower has not been over many acres.

* Parts available from your John Deere Dealer Network.

* This mower came from a local estate sale

* 1 3/8 inch diameter standard PTO included

* Owners Manual included.

* 29 HP tractor minimum 65 HP Maximum required.

*Gearbox runs free and quiet on our farm tractor.

*Mower cuts great.

* No breaks or welds

* New parts added as needed
   
 
Copyright ©  www.sweettractors.com. All Rights Reserved.
Built with Volusion