Bookmark us!
Sign up for our newsletter to get the latest news and specials!


Bookmark us!

Home > In Store Pickup > Grooming Mowers/Brush Hogs

Tractor Lawn Mowers & Finish Mowers

Grooming mowers are lawn mowing units that attach to the back of your tractor for convenient, efficient mowing of large spaces. These mowers are available in different widths and sizes and utilize a multi-blade system to give you a smooth, level cut, every time. They are available in different strengths for diverse mowing conditions and are designed to handle various ground conditions, including soft and slightly rocky ground.

Our New Grooming mowers feature floating hitches that lets the mower float with uneven terrain. For decades, these mowers have been valued for their ability to continuously perform with little to no maintenance, even through repeated heavy usage.

At Sweettractors.com we’re proud to offer you a range of tractor mowers from the most reputable brands in the industry. We offer Phoenix, Tarter, Farmaxx, Big Bee and Hawkline cutters. We offer new and used finish lawn mowers at budget friendly prices. All of our used units have been thoroughly inspected, repaired, and tested to ensure that you’re getting the quality you deserve out of your purchase.

Sweettractors.com is committed to providing our customers with high quality products and service, every time. We proudly offer replacement parts for finish lawn mowers, such as blades, axles, and torque pads for regular maintenance, repairs and tune ups.

Sort By:
Page of 2
Brush Hog Tailwheel hub for 1 inch axle.Store.Pickup
Our Price: $59.00

New Brush Hog Tail wheel axle hub is grease-able and has a 1 inch axle hole in it and the 4 mounting bolts are on 3 1/2 inch centers. This hub most all rotary cutters that take the 1 inch axle bolt, like the IMC, Hawkline, International, Big Bee.and many, many more.. If you have any questions about this item, Please Email sweet@scrtc.com anytime or Call Toll Free 1-866-528-3323 or 270-528-3323 Mon-Fri-8-5 CST and on Sat. 8-12 CST.
IMC and Hawkline Torque Pad with Bushings.Store.Pickup
Our Price: $78.00

Selling One laminated rubber/fiber torque pad with 6 steel bushings. Measures 6 3/8 outside diameter and 2 1/8 inside diameter and 11/16 thick These are for the bigger rotary cutters, Brush Hogs, shredders, like 8-10-11 ft in width and the go between the center gearbox and the outboard gearbox. This Rubber torque pad fits IMC, World Agritech, Big Bee, Alamo, Servis Rhino, Woods, IMC, Hawkline, Kodiak, International and many more. If you have any questions about this item, Please Email sweet@scrtc.com anytime or Call Toll Free 1-866-528-3323 or 270-528-3323 Mon-Fri-8-5 CST and on Sat. 8-12 CST.
Brush Hog Tailwheel fork for 1" axle and 1 1/2" stem.Store.Pickup
Our Price: $89.00

New Tailwheel fork has a stem that is 1 1/2 inch in diameter and 7 1/2 inches long. It has a 1 inch diameter axle hole. If you have any questions about this item, Please Email sweet@scrtc.com anytime or Call Toll Free 1-866-528-3323 or 270-528-3323 Mon-Fri-8-5 CST and on Sat. 8-12 CST.
2 New Rotary Cutter Blades, 24 1/2" X 3 1/2" X 1/2".Store.Pickup
Our Price: $98.00

You are buying 2 New blades that are 24 1/2" Overall length X 3 1/2" Wide and 1/2" thick. From the Center of hole to end of blade is 22 1/2", Blade Bolt hole is 1 1/2" Diameter. Blades are "Left Hand cut" and have a 2" offset in the blade. High lift (suction) type cutting edge. Fits 5 ft or 10 Howse/HICO and most other 5 or 10 ft rotary cutters that meet these dimensions.
2 New Rotary Cutter Blades, 33 1/2" X 3 1/2" X 1/2".Store.Pickup
Our Price: $108.00

You are buying 2 New blades that are 33 1/2" Overall length X 3 1/2" Wide and 1/2" thick. From the Center of hole to end of blade is 31 5/8", Blade Bolt hole is 1 1/2" Diameter. Blades are "Left Hand cut" and have a 2" offset in the blade. High lift (suction) type cutting edge. Fits 7 ft Howse/HICO and most other 7 ft rotary cutters that meet these dimensions.
New 40 hp gearbox that fits many brush hogs or rotary cutters.Store.Pickup
Our Price: $235.00

This is a new 40 hp gearbox that fits all brush hogs or rotary cutters with 1 3/8 inch smooth input shaft with 1/2 inch shearpin and a 12 spline output that is coming out the bottom. Uses standard 4 bolt mounting pattern with bolts spaced 4 3/4 inch on centers. Comes with new splined hub for the blade carrier if your old one is wore out. Gearbox is shipped with no oil.
New Tennessee River Imp. 4 ft. Rotary Cutter.Store.Pickup
Our Price: $895.00

New Tennessee River Imp. 4 ft. Rotary Cutter or Brush Hog Made in USA ! * Working width 4 ft. * Approx. Weight 400 lbs. * Medium Duty for pasture maintenance and general cutting. * 40 HP Gearbox with shear pin protection. * Stump Jumper on underside of deck. * Cat. 1 Hook up. * Single laminated tailwheel in rear. * Comes complete with power shaft. * Minimum 25 HP. with adequate front weight or loader. * Cut capacity up to 1 "
New Tennessee River 40" Rotary Cutter.Store.Pickup
Our Price: $895.00

New Tennessee River Imp.  40" Rotary Cutter or Brush Hog
Made in USA !

*  Perfect cutter for your small compact tractor!

*  Working width 40"

*  Approx. Weight 370 lbs.

*  Medium Duty for pasture maintenance and general cutting.

*  40 HP Gearbox with shear pin protection.

*  Stump Jumper on underside of deck.

*  Cat. 1 Hook up.

*  Single laminated tailwheel in rear.

*  Comes complete with power shaft.

*  Minimum  25 HP. with adequate front weight or loader.

*  Cut capacity up to 1 "

*  Kubota Orange Color
New Tennessee River Imp.5 ft. Rotary Cutter.Store.Pickup
Our Price: $945.00

New Tennessee River Imp. 5 ft. Rotary Cutter or Brush Hog Made in USA ! * Working width 5 ft. * Approx. Weight 620 lbs. * Medium Duty for pasture maintenance and general cutting. * 40 HP Gearbox with shear pin protection. * Stump Jumper on underside of deck. * Cat. 1 or 2 clevis (no pins to keep working loose) * Single laminated tailwheel in rear. * Comes complete with power shaft. * Cutter comes in John Deere green color. * Minimum 30 HP. with adequate front weight or loader. * Cut capacity up to 1 " * HD 6" Channel sides *We can ship this item to you for $1.85 per loaded mile from our zip code of 42765. Or you can pick up this item at our Munfordville, KY Store. Zip code 42765 Call 270-524-0385 (Right off of Interstate 65 Exit #65)
New Tennessee River 6ft Rotary Cutter.Store.Pickup
Our Price: $995.00

New Tennessee River Imp. 6 ft. Rotary Cutter or Brush Hog with shear pin.
Made in USA !

*  Working width 6  ft.

*  Weight approx. 708 lbs.

*  Medium Duty for pasture maintenance and general cutting.

*  40 HP Gearbox with Shear Pin protection.

*  Stump Jumper on underside of deck.

*  Cat. 1  or 2 Clevis Type Hook up.

*  Single Adjustable laminated tailwheel in rear.

*  Comes complete with power shaft.

*  Minimum  35 HP. with adequate front weight or loader.

*  Cut capacity up to 1 "

*  Deck Thickness  11 ga.

*  Floating A-Frame.

*  Side Bands HD 6" Channel.
   
 
Copyright ©  www.sweettractors.com. All Rights Reserved.
Built with Volusion